Color imageRUNNER Enlargement Copy
Setting the Print Parameters
Y ou can set the print conditions in the setting panels within the “Add/Edit Hot Folder” dialog box.
The settings available on each panel are as follows.
• Paper Settings Panel (→P .544)
• Output Settings Panel (→P .549)
• Color Settings Panel (→P .551)
Paper Settings Panel
“Easy Settings” / “Advanced Settings”
T wo modes are available to provide the optimum print settings for jobs.
The settings available on each mode are as follows.
• Easy Settings (→P .546)
• Advanced Settings (→P .548)
“Media T ype”
This allows you to select the media type.
Note
• Always select media type that is actually set in the printer . When the media you chose is dif ferent from
the media set in the printer , you may not receive the desired print results.
Paper Source
Y ou can select the paper source.
The following settings are available for paper source.
Setting
Details
“Manual” Select for manual paper feed printing.
“Roll Paper” Select to print on roll paper .
544 Mac OS X Software
To Next Page
Loading...
