Adjusting the Printhead
2. On the T ab Selection screen of the Control Panel , press ◄ or ► to select the Settings/Adj.
tab ( ).
Note
• If the T ab Selection screen is not displayed, press the Menu button.
3. Press the OK button.
The Set./Adj. Menu is displayed.
4. Press ▲ or ▼ to select Adjust Printer , and then press the OK button.
5. Press ▲ or ▼ to select Head Posi. Adj. , and then press the OK button.
6. Press ▲ or ▼ to select Auto(Standard) or Auto(Advanced) , and then press the OK button.
A test pattern is printed for adjustment.
Adjustment is now nished if you have printed on a roll or a sheet of A2 size or larger .
7. If you are printing on sheets smaller than A2 size for Auto(Advanced) , a conrmation message
is displayed requesting you to continue printing. Press the OK button and follow the instructions
displayed.
Adjustments for Better Print Quality 605
To Next Page
Loading...
