Control Panel
Setting Item Description, Instructions
V acuumStrngth Specify the level of suction that holds paper against
the Platen . ( → P .621)
Scan W ait T ime Specify the time to wait for the ink to dry between
each scan in bidirectional printing, in consideration of
how quickly the ink dries. Note that printing will take
longer if you specify a wait time.
Roll
DryingT ime
Specify the time to wait for the ink to dry for each
sheet.
NearEnd
RollMrgn
Specify the minimum margin at the leading edge
of roll paper to ensure better printing quality at the
leading edge.
Note that if you choose 3mm , it may lower the
printing quality at the leading edge and af fect feeding
accuracy . The printed surface may be scratched,
and ink may adhere to the leading edge. It may also
cause the Platen to become soiled.
NearEnd Sht
Mrgn
Specify a margin at the leading edge of sheets to
ensure better printing quality at the leading edge.
Note that if you choose 3mm , it may lower the
printing quality at the leading edge and af fect feeding
accuracy . The printed surface may be scratched, and
ink may adhere to the leading edge.
Bordless
Margin
Adjust the margin during borderless printing.
Choose Automatic to have the printer automatically
detect the paper width and congure the margin
settings for borderless printing. If margins are
mistakenly created when Automatic is selected,
choose Fixed . In this case, the paper width is not
detected automatically , and the document is printed
without borders, using the margin settings required
by the printer .
W idth
Detection
Specify this option to print inside boundaries or in
other cases when specifying a particular starting
position for printing. ( → P .1 13)
Paper width and skew are not detected if you select
Off . If paper is loaded askew , note that paper jams or
Platen soiling may occur .
Paper Details (The type
of paper is
displayed
here.)( *1 )
Return
Defaults
Choose OK to restore Paper Details to the default
values.
Paper Details Print the paper settings as specied in Paper Details .
Keep Paper T ype Select On when printing on a particular type of paper
regularly . ( → P .1 10)
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide . ( → P .96)
The types of paper indicated in the printer driver and related software (as well as on the Control Panel )
are updated when you install the printer driver from the User Software CD-ROM or if you update paper
information by using the Media Conguration T ool . (See Media Conguration T ool Guide (Windows) or
Media Conguration T ool Guide (Macintosh).)
50 Printer Parts
To Next Page
Loading...
Need help?
General
