Control Panel
Setting Item Description, Instructions
Sleep T imer Specify the period before the printer enters sleep
mode.
Buzzer Choose On for the buzzer to sound in case of errors.
Contrast Adj. Adjust the Display Screen contrast level.
Date Set the current date.Date &
T ime
T ime Set the current time. A vailable only if the Date setting
is specied.
Date Format Specify the date format.
Language Specify the language used on the Display Screen .
T ime Zone Specify the time zone. T ime zone options indicate a
main city in this time zone and the dif ference from
Greenwich Mean T ime.
Length Unit Choose the unit of measurement when roll length
is displayed. Change the unit displayed for the
remaining amount of roll paper .
Detect Mismatch Specify printing behavior if the type and size of paper
specied in the printer menu does not match the type
and size in the printer driver .
Choose Pause to have printing paused under these
circumstances. Choose W arning to continue printing
after notication. Choose None to continue printing
without notication.
Roll Selection 1 If roll size detection is activated, choose whether ISO
A3 (297mm) or 300mm Roll is applied when a roll of
an intermediate width is detected.
Paper
Size
Basis
Roll Selection 2 If roll size detection is activated, choose whether
10in. (254mm) or JIS B4 (257mm) is applied when a
roll of an intermediate width is detected.
System
Setup
Keep Paper Size Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin
setting of the printer menu will be used instead of
the margin setting of the printer driver if the latter
is smaller , which may prevent text or images in the
margin from being printed.
Printer Parts 57