Canon Laser Class 810 - Page 100

Sending Documents
4-4
Specify the Destination Send the Document
Specify the fax number or e-mail, I-fax
address with the numeric keys.
You can also specify the fax number or e-mail addresses
with one-touch keys, coded dial codes, or [Address Book]
key. (See “Specifying Destinations,” on p. 4-44.)
Press [Start].
= 1 2 3
Ex.
F A X N U M B E R
You enter a wrong number when
specifying a fax number:
Go back to the wrong digit with [
].
You enter a wrong character when
specifying an e-mail or I-fax address:
Go back to the wrong character with
[ ], then press [Clear]. Or press and hold
[Clear] to delete the entire entry.
●
●
You want to cancel sending:
Press [Stop] on the operation panel.
When the <STOP KEY PRESSED> message
appears, press [OK].
When the <CANCEL?> message appears,
select <YES> with [
].
If <ORIGINAL SIZE> is displayed after
you press [Start]:
Press [ ] or [ ] to specify the original
size.
●
●