Sending Documents
4-44
Specifying Destinations
Follow the procedure below to send documents to registered recipients.
To send documents to a file server, you can specify the file server addresses only with one-touch keys, coded
dial codes, or [Address Book].
Using One-Touch Keys
You can specify up to 80 destinations using one-touch keys.
To use this feature, you must register destinations in one-touch keys beforehand. (See “Storing/Editing Address
Book,” on p. 4-12.)
1 Set documents.
2 Press [Fax/Send] repeatedly to select the sending method, then press [OK].
If using the LASER CLASS 810, you can switch to the Fax mode by pressing [Copy/Fax].
To send documents to a file server, select any sending method (LASER CLASS 830i Only).
To Next Page
Loading...
