Canon Laser Class 810 - Restricting the New Address

System Manager Settings
9-26
Restricting the New Address
This mode enables you to restrict the entering of new destinations. When you set
<RESTRICT NEW ADD.> to <ON>, the following are restricted:
Specifying a destination using the numeric keys.
Changing registered destinations.
Registering new destinations.
1 Press [Additional Functions].
2 Press [ ] or [ ] to select <SYSTEM SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter the System Manager ID and System
Password using the numeric keys, then press [Log In/Out (ID)].
3 Press [ ] or [ ] to select <RESTRICT TX FUNC>, then press [OK].
4 Press [ ] or [ ] to select <RESTRICT NEW ADD.>, then press [OK].
5 Press [ ] or [ ] to select <ON> or <OFF>, then press [OK].
6 Press [Stop] to return to the standby mode.