11-37
Troubleshooting
The alarm sounds or <MEMORY FULL> appears in the LCD when making copies.
Is the machine’s memory full?
Check remaining memory. (See “Checking Remaining Memory,” on p. 12-64.)
Telephone Problems
Cannot dial.
Is the telephone cable connected properly?
Make sure the cable is connected properly. (See “Set Up the Machine,” in the
Starter Guide.)
Is the power cord plugged in securely?
Check that the power cord is securely plugged into the machine and into the
wall outlet. If the machine is plugged into a power strip, make sure the power
strip is plugged in and turned on.
Is the main power switch turned on?
Turn on the main power switch.
Is the machine set for the correct telephone line type?
Make sure the machine is set for the correct telephone line type. (See “Set the
Machine for Sending Faxes,” in the Starter Guide.)
Telephone disconnects while you are talking.
Is the telephone cable connected properly?
Make sure the cable is connected properly. (See “Set Up the Machine,” in the
Starter Guide.)
Is the telephone cable defective?
Use another cord.
To Next Page
Loading...
