Canon Laser Class 810 - Checking the Job Log

System Manager Settings
9-32
Checking the Job Log
You can specify whether or not to check the job log. When you set <CHECKING THE
LOG> to <ON>, you can check the job log using the System Monitor screen. When
you set <CHECKING THE LOG> to <OFF>, the job log does not appear on the System
Monitor screen.
When you set <CHECKING THE LOG> to <OFF>, the Activity Report will not print automatically.
1 Press [Additional Functions].
2 Press [ ] or [ ] to select <SYSTEM SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter the System Manager ID and System
Password using the numeric keys, then press [Log In/Out (ID)].
3 Press [ ] or [ ] to select <CHECKING THE LOG>, then press [OK].
4 Press [ ] or [ ] to select <ON> or <OFF>, then press [OK].
5 Press [Stop] to return to the standby mode.