12-11
Machine Settings
TX/RX SETTINGS
Setting Item Description
1. TX/RX COMMON SET. Sets the features common to the fax and send functions.
1. TX SETTINGS Sets the transmission features.
1. UNIT NAME Registers your name/company name (max. 24 characters,
including spaces). (See “Set the Machine for Sending Faxes,” in
the Starter Guide.)
2. DATA COMPRESSION
*
Sets the compression ratio for color scanned data. A high
compression ratio reduces the amount of memory used for the
document, but results in low quality images. On the contrary, a
low compression ratio increases the amount of memory used for
the document, but results in high quality images.
NORMAL
HIGH RATIO
LOW RATIO
–
–
–
3. RETRY TIMES
*
Sets the number of retry attempts for sending jobs to an e-
mail or file server address. (0-5) (See Reference Guide > Send/
Receive.)
4. SCANNING DENSITY Adjusts the scanning density for sending documents. (1-9)
5. STANDARD SETTINGS Sets the default settings for sending documents.
1. DENSITY Sets the default density for the document you send.
STANDARD
DK
LT
–
–
–
2. RESOLUTION Sets the default resolution for the document you send.
(200X200dpi, 200X400dpi, 300X300dpi, 400X400dpi,
600X600dpi, 100X100dpi, 150X150dpi, 200X100dpi)
To Next Page
Loading...
