Receiving Documents
5-8
Memory Reception
The machine automatically receives faxes in memory when printing is disabled under
certain conditions (e.g., toner or paper has run out).
When the problem is cleared, the machine automatically prints the fax which was stored in
the memory.
The main memory of the LASER CLASS 830i can store data for a maximum of 90 jobs or approximately 1,500
pages.*
1
The main memory of the LASER CLASS 810 can store data for a maximum of 90 jobs or approximately 512
(1,500*
2
) pages.*
1
*
1
Based on the condition that the other party sends the fax by the LASER CLASS 830i with ITU-T Standard Chart
No. 1, standard mode. The maximum number of pages that the machine’s memory can store differs depending
on the other party’s machine.
Once the pages are printed, they are deleted from the memory.
If the memory becomes full, you will not be able to receive the remaining pages. Contact the other party and
ask them to resend the remaining pages of the fax.
*
2
For the LASER CLASS 810, an optional network printer kit is required.
To Next Page
Loading...
