Canon Laser Class 810 - Basic Copying Method

Copying
3-2
Basic Copying Method
Follow this procedure to make a copy.
Set a Document Enter the Copy Mode
Load the document in the ADF.
For documents you can copy, see “Document
Requirements,” on p.
2-2.
Press [Copy]
If using the LASER CLASS 810, you can switch to the Copy
mode by pressing [Copy/Fax].
You want to adjust the image quality
and density:
See “Scan Settings,” on p. 3-4.
To copy using paper loaded in the
multi-purpose tray or the optional
paper cassette:
Press [Paper Select], and select the paper
source.
●
●