Sending Documents
4-16
12 Press [ ] or [ ] to select <ECM>, then press [OK].
13 Press [ ] or [ ] to select <ON> to reduce system and line errors while
sending to or receiving from other machines that support ECM, then press [OK].
To register another one-touch key or coded dial code, repeat the procedure from step 4.
14 Press [ ] or [ ] to select <TX SPEED>, then press [OK].
15 Press [ ] or [ ] to select the sending speed (33600 bps, 14400 bps, 9600
bps, or 4800 bps), then press [OK].
If transmission errors occur frequently, lower the speed.
To Next Page
