4-47
Sending Documents
4 Enter the desired three-digit code (LASER CLASS 810: 000 to 119, LASER CLASS
830i: 000 to 419) with the numeric keys.
= 0 1 2 3 X X X X X X
[ * 0 0 1 ] C A N O N
Ex.
If you entered a wrong code, press [Clear], then try again from step 3.
If you want to adjust the image quality and density, see “Scan Settings,” on p.
4-5.
5 Press [Start].
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if
you have specified the destination by any other method than using numeric keys, the machine starts
scanning automatically without pressing [Start], after the preset time for this setting is elapsed.
To Next Page
Loading...
