Sending Documents
4-70
4 Press [ ] or [ ] to select <1 BEFORE>, <2 BEFORE>, or <3 BEFORE>, then
press [OK].
5 Confirm that the desired recipient is displayed.
For information on changing scan settings such as the resolution when using the Recall function, see
"Scan Settings," on p. 4-5.
6 Press [Start].
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if
you have specified the destination by any other method than using numeric keys, the machine starts
scanning automatically without pressing [Start], after the preset time for this setting is elapsed.
To Next Page
Loading...
