Sending Documents
4-84
5 Use the numeric keys to dial the country code, the area code, and the fax/
telephone number of the recipient.
6 If necessary, press [Pause] to enter a pause at the end of the number.
The letter <P> appears at the end of the fax number.
Pauses entered at the end of fax numbers are always 10 seconds long.
7 Press [Start].
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if
you have specified the destination by any other method than using numeric keys, the machine starts
scanning automatically without pressing [Start], after the preset time for this setting is elapsed.
To Next Page
Loading...
