Canon Laser Class 810 - Page 233

9-3
System Manager Settings
4 Press [ ] or [ ] to select <SYS. MANAGER ID>, then press [OK].
5 Use the numeric keys to enter a number, then press [OK].
You must set both a System Manager ID and password to manage the operations of the machine.
6 Press [ ] or [ ] to select <SYSTEM PASSWORD>, then press [OK].
7 Use the numeric keys to enter a number, then press [OK].
8 Press [ ] or [ ] to select <SYSTEM MANAGER>, then press [OK].
9 Use the numeric keys to enter the System Manager’s name, then press [OK].
10 Press [Stop] to return to the standby mode.