Canon Laser Class 810 - Page 259

9-29
System Manager Settings
Restricting Redialing (LASER CLASS 810 Only)
You can specify whether or not to allow using [Redial].
1 Press [Additional Functions].
2 Press [ ] or [ ] to select <SYSTEM SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter the System Manager ID and System
Password using the numeric keys, then press [Log In/Out (ID)].
3 Press [ ] or [ ] to select <RESTRICT TX FUNC>, then press [OK].
4 Press [ ] or [ ] to select <RESTRICT REDIAL>, then press [OK].
5 Press [ ] or [ ] to select <ON> or <OFF>, then press [OK].
6 Press [Stop] to return to the standby mode.