2-3
Document and Paper
Do not place the document in the ADF until the glue, ink or correction fluid on the
document is completely dry.
Remove all fasteners (staples, paper clips, etc.) before loading the document in the ADF.
To prevent document jams in the ADF, do not use any of the following:
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Coated paper
Torn paper
Onion skin or thin paper
Documents with staples or paper clips attached
Paper printed with a thermal transfer printer
Transparencies
●
●
●
–
–
–
–
–
–
–
–
–
To Next Page
Loading...
