Canon Laser Class 810 - Page 90

Copying
3-16
1 Set documents.
2 Press [Copy].
If using the LASER CLASS 810, you can switch to the Copy mode by pressing [Copy/Fax].
3 Press [2-Sided] repeatedly to select <2 > 1-SIDED>, then press [OK].
4 Use [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE>, then press
[OK].
If using the LASER CLASS 830i:
When images in documents are set vertically as illustrated above, select the desired output.
<BOOK TYPE>: Select if images on the back side of a document have the same top-bottom orientations
as the front side of the document.
<CALENDAR TYPE>: Select if images on the front and back sides of a document have opposite top-
bottom orientations.
●