Canon MF3110 - ImageCLASS Laser Multifunction - Removing the Cassette; SCNT Board

Chapter 3
3-7
3) Remove the 2 screws on the back [1]. Slide the
scanner unit [2] to the back; then, remove it by
lifting it.
F-3-25
3.1.6.6 Removing the Board
Unit
0007-7490
1) Remove the 4 screws [1] on the back side of the
scanner unit.
F-3-26
2) Open the board unit [1], and remove the connector
[2], the grounding cable [3] and the 3 flat cables [4].
F-3-27
3.1.6.7 Removing the
Operation Panel Unit
0007-7491
1) Reomve the 2 screws [1], and remove the flat cable
from the core.
F-3-28
2) Remove the 2 claws [2] on the operation panel unit
[1], and remove the operation panel unit.
F-3-29
3.1.7 SCNT Board
3.1.7.1 Removing the Cassette 0006-2984
1) Remove the cassette by holding the cassette handle.
[1]
[2]
[1]
[4]
[1]
[3]
[2]
[1]
[1]
[2]