Canon MF3110 - ImageCLASS Laser Multifunction - Removing the Rear Cover; Removing the Scanner Unit; Removing the Top Cover

Chapter 3
3-35
3.3.1.4 Removing the rear
cover
0007-7770
1) Opening the faceup cover [1], and then lower the
fixing pressure release levers [2] on both sides and
release the pressure.
2) Remove 2 screws [3].
3) Remove the rear cover [4] as you pull it toward you.
F-3-140
3.3.1.5 Removing the Scanner
Unit
0007-7771
1) Remove the connector [1] and the flat cable [2] on
the ECNT board, and remove the screw [3].
(Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the
right and left sides.
F-3-141
3)
Remove the 2 screws on the back [1]. Slide the scanner
unit [2] to the back; then, remove it by lifting it.
F-3-142
3.3.1.6 Removing the Top
Cover
0007-7772
1) Remove the 2 screws [1], and remove the Top cover
[2].
F-3-143
[1] [4]
[3] [3]
[2]
[2]
[4]
[3][1]
[5]
[1]
[2]
[2]
[1]