Access Navigator - Release 1.8 August 2003 6-7
Electrical Installation
Attach Ground Lug to Access Navigator
Attach Ground Lug to Access Navigator
WARNING! SHEET METAL CAN BE DAMAGED BY BENDING GROUND WIRE WHEN
GROUND LUG IS ATTACHED TO ACCESS NAVIGATOR. BEFORE ATTACHING GROUND LUG
SCREWS, CAREFULLY BEND THE GROUND WIRE TO POSITION THE GROUND LUG OVER
THE REAR PANEL TERMINALS.
1. Attach ground lug to chassis with screws provided.
2. Ensure that ground lug screws securely hold equipment ground lug to chassis.
To Next Page
Loading...