Carrier Access Access Navigator - Status Clock

18-156 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Status Clock
Purpose: Displays the currently active clock source, along with the primary and secondary clock
settings and clock source status.
Security: Level 3 (monitor)
Syntax: status clock
Message:
Active Clock Source: DS1 12
Primary:
Clock Source: DS1 12
Clock Status: In Service
Secondary:
Clock Source: INTERNAL
Clock Status: In Service
Description:
Item Description
Active Clock Source Indicates the Clock Source currently being used.
Primary Indicates clock source to use for normal operation.
Secondary Indicates clock source to use if primary clock source fails.
Clock Source DS1 number – DS1 clock recovered by receiver.
BITS – External Building Integrated Timing Supply.
INTERNAL – internal Stratum clock oscillator.
Clock Status In Service – working.
Out of Service – not working.