Access Navigator - Release 1.8 August 2003 18-161
CLI Language Reference
CLI Command List
Status DS1 All
Purpose: Displays an abbreviated list showing the status for all 32 DS1 circuits. It produces a
message similar to the following, showing the DS1 number, current status, and some
common parameters of interest in trouble-shooting. (To obtain a detailed list for a
specific DS1 or range of DS1s, use the status ds1 <n> command.)
Security: Level 3 (monitor)
Syntax: status ds1 all
Message:
Clock
DS1 Status FDL Remote Device Management Source
--- ------------------------- ----- ------------------------ ---------
1 In use as DROP None CA FDL In Service
2 User set Out of Service T1403 None n/a
3 In use as DROP None None n/a
4 In use as DROP None None n/a
5 In use as DROP None None n/a
6 In use as DROP None None n/a
7 In use as DROP None None n/a
8 In use as DROP None None n/a
9 In use as DROP SLC96 None n/a
10 In use as DROP None CA IP In Service
11 In use as DROP None DS1 10 n/a
12 In use as DROP None None n/a
13 In use as DROP None None n/a
14 In use as DROP None None n/a
15 In use as DROP None None n/a
16 In use as DROP None None n/a
17 In use as DROP None None n/a
18 In use as DROP None None n/a
19 In use as DROP None None n/a
20 Facility failure None None n/a
21 In use as GROOM None None n/a
22 In use as GROOM None None n/a
23 User set Out of Service None None n/a
24 User set Out of Service None None n/a
25 In Service None None n/a Primary
26 In Service None None n/a
27 In Service None None n/a
28 In Service None None n/a
29 In Service None None n/a Secondary
30 In Service None None n/a
31 User set Out of Service None None n/a
32 User set Out of Service None None n/a
Description:
Item Description
DS1 DS1 number, 1 to 32
To Next Page
Loading...