Carrier Access Access Navigator - Status CRV; GR-303 Status and Performance

To Next Page

To Previous Page

15-22 August 2003 Access Navigator - Release 1.8

Diagnostics & Troubleshooting

GR-303 Status and Performance

n Status CRV ... 15-22

n Status ISDN CRV ... 15-23

n Status EOC ... 15-25

n Status TMC ... 15-25

n Status TMC History ... 15-27

n Clear Blocked Call Count ... 15-28

n Clear Peak Call Count ... 15-28

n Clear Permanent Call Count ... 15-28

n Set CRV Idle ... 15-28

Status CRV

Displays the status of the specified CRV number.

NOTE: In the following command, there can be up to 24 CRVs in a range,

such as 1-24 or 110-134. The CRVs do not have to be on the same DS1.

Syntax: status crv <range>

Example: status crv 10

Example: status crv 5-8

Message:

CRV Status Call Status

--- ------ -----------

4 Not Assigned

5 In Service Active

6 In Service Active

7 In Service Idle

8 In Service Permanent

9 Assigned to ISDN

Field Description

range Call Reference Value, 1 to 768, or a range of values such as 15-

18. Maximum range is 24 CRVs.