Carrier Access Access Navigator - Show Date; Show DS0

Access Navigator - Release 1.8 August 2003 18-139
CLI Language Reference
CLI Command List
Show Date
Purpose: Display Access Navigator system clock date. Date format is month/day/year.
Security: Level 3 (monitor)
Syntax: show date
Message: 1/30/1999
Show DS0
Purpose: Displays the settings for each DS0 specified.
Security: Level 3 (monitor)
Syntax: show ds0 <n:ch>
Example: show ds0 10:1-4
Message:
Settings for DS1 13, Channel 1:
Type: GR303
Signaling: LOOP START
Up/Down: UP
CRV: 35
PPHONE: Enabled
ISDN: None
Settings for DS1 13, Channel 2:
Type: GR303
Signaling: DID
Up/Down: UP
PPHONE: Enabled
CRV: 36
ISDN: None
Settings for DS1 13, Channel 3:
Type: DATA
Up/Down: DOWN
CRV: No CRV assigned
PPHONE: Enabled
ISDN: None
Field Description
n DS1 number, 1 to 32.
ch DS0 number, 1 to 24, or a range of numbers such as 5-8.