Carrier Access Access Navigator - Install Quad T1 Framer Card

To Next Page

To Previous Page

Access Navigator - Release 1.8 August 2003 6-57

Electrical Installation

Install Quad T1 Framer Card

NOTE: Quad T1 Framer (QF) cards are typically installed in sequential order, from 1 to

8. Locate next available Quad T1 Framer card slot (see Figure 6-38).Figure 6-39 shows

installation of QF card #6.

1. Locate card slot in which to install Quad T1 Framer card (see Figure 6-38).

Figure 6-38. Location of Quad T1 Framer Cards

QF Card #6

Circuits 21-24

QF Card #8

Circuits 29-32

QF Card #7

Circuits 25-28

QF Card #5

Circuits 17-20

QF Card #4

Circuits 13-16

QF Card #3

Circuits 9-12

QF Card #2

Circuits 5-8

QF Card #1

Circuits 1-4