Carrier Access Access Navigator - Clear Log; Clear Peak Call Count; Clear Permanent Call Count; Clear Remote Log

18-28 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Clear Log
Purpose: Erases all data in the log file, which records alarm and informational events.
Security: Level 3 (monitor)
Syntax: clear log
Clear Peak Call Count
Purpose: Sets the peak call count to zero (see Status TMC on page 18-173).
Security: Level 3 (monitor)
Syntax: clear peak call count
Clear Permanent Call Count
Purpose: Sets the permanent call count to zero (see Status TMC on page 18-173). After clearing
the count, the Access Navigator will recalculate the current number of permanent calls.
Security: Level 3 (monitor)
Syntax: clear permanent call count
Clear Remote Log
Purpose: Erases all entries in the remote log of the Access Bank II.
Security: Level 3 (monitor)
Syntax: clear remote <n> log
Example: clear remote 9 log
Clear TMC Log
Purpose: Erases all data in the TMC log file, which records the occurrence of blocked calls and
permanent calls reported to the GR-303 switch.
Security: Level 3 (monitor)
Syntax: clear tmc log
Field Description
n DS1 number, 1 to 32.