Carrier Access Access Navigator - Log Tmc

Access Navigator - Release 1.8 August 2003 18-43
CLI Language Reference
CLI Command List
Log TMC
Purpose: Displays TMC (Timeslot Management Control) events, which are stored in a TMC log
file that holds the most recent 200 error reports in a separate log file. This log applies
only to GR-303 call service. The TMC log file will be erased by a power interruption,
clear tmc log command, reset command, or restore defaults command.
Security: Level 3 (monitor)
Syntax: log tmc
Displays all configuration events.
Syntax: log tmc permanent
Displays only TMC events for permanent (off-hook) call states.
Syntax: log tmc crv <value>
Displays only CRV events.
Example: log tmc
Message:
Switch Drop
Time Date TermID:DS0 DS1:DS0 CRV TMC Event Cause
---- ---- ---------- ------- --- --------- -----
12:00:19 02/11/2000 3 Enter perm state
12:00:32 02/11/2000 32 Exit perm state
12:02:03 02/11/2000 17 CRV not assigned
11:20:25 02/11/2000 1:23 235 DS1 not type drop
11:20:25 02/11/2000 11:23 235 Drop DS0 not type GR303
11:10:02 02/11/2000 3:12 DS1 not type switch
11:10:02 02/11/2000 30:12 Switch DS0 not type GR303
08:27:53 02/11/2000 5:29 Switch DS1:DS0 OOS
08:52:01 02/11/2000 2:6 Drop DS1:DS0 OOS
07:01:29 02/10/2000 27 No disconnect on active CRV
07:01:40 02/10/2000 47 Off-hook on perm CRV
07:48:20 02/10/2000 601 Blocked call - REL 15
07:59:02 02/10/2000 44 Blocked call - DISC 2
10:20:38 02/10/2000 17 Blocked call - DREQ 17
15:39:30 02/09/2000 20 No switch response 25
Description:
Field Description
value Call Reference Value, 1 to 768
Item Description
Time Time of the event.
Date Date of the event.