6-56 August 2003 Access Navigator - Release 1.8
Electrical Installation
Remove Front Cover
Remove Front Cover
DANGER! BURN HAZARD. CHASSIS, COVER SCREWS, AND CARDS MAY BE HOT TO
THE TOUCH.
WARNING! THE ACCESS NAVIGATOR CONTAINS CIRCUIT CARDS AND COMPO-
NENTS THAT ARE SUBJECT TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD).
A
LWAYS FOLLOW THE STATIC-SENSITIVE EQUIPMENT HANDLING PROCEDURES ON
page 6-3 WHEN OPENING EQUIPMENT COVERS AND HANDLING PLUG-IN CIRCUIT CARDS.
1. Put on grounding wrist strap and follow anti-static procedures.
2. Loosen captive thumbscrews on front cover (see Figure 6-37).
3. Remove front cover and set aside.
Figure 6-37. Location of Front Panel Cover Screws
Screw
Screw
Screw
Screw
To Next Page
Loading...