Carrier Access Access Navigator - Identify Alarm Clearing Procedure

14-2 August 2003 Access Navigator - Release 1.8
Alarm Clearing
Identify Alarm Clearing Procedure
Identify Alarm Clearing Procedure
Find alarm source in following list and go to the alarm clearing procedure:
l CLI alarm message – go to Clear Alarms – FDL on page 14-3
l EOC alarm message – go to Clear Alarms – EOC on page 14-8
l SNMP alarm message – go to Clear Alarms – SNMP on page 14-14
l Equipment Status Indicators – go to Clear Alarms – Status Indicators on page 14-15
l Facility Alarm System – go to Clear Alarms – FDL on page 14-3
l Unknown – go to Clear Alarms – FDL on page 14-3