Carrier Access Access Navigator - DS1 Framed Path Termination Objects; DS0 Channel Termination Objects

A-6 August 2003 Access Navigator - Release 1.8
EOC Interface
DS0 Channel Termination Objects
DS0 Channel Termination Objects
This object class is used to manage DS0s in the Interface Group. The Access Navigator
inherently creates an instance of this object class for each DS0 on a “switch” type DS1.
DS1 Framed Path Termination Objects
This object class is used to manage DS1 framed paths. The Access Navigator inherently
creates an instance of this object class for each “switch” type DS1.
The DS1 framed path termination identifier (ds1FramedPathTermId) matches the switch DS1
termination identifier (termid) set using CLI commands.
Table A-3 DS0 Channel Termination Objects
Attribute Support Command Support
Create Get Set Delete
objectClass Yes
ds0ChannelTermId Yes
primaryServiceState Yes
secondaryServiceState Yes
Table A-4 DS1 Framed Path Termination Objects
Attribute Support Command Support
Create Get Set Delete
objectClass Yes
ds1FramedPathTermId Yes
primaryServiceState Yes
secondaryServiceState Yes
alarmSeverityAssignmentList Yes Yes
ds1FrameFormat Yes Yes