Access Navigator - Release 1.8 August 2003 10-33
Provision GR-303 Service
Assign Call Reference Values (CRVs)
Figure 10-5. Factory Default Call Reference Values
2. If drop DS0 CRV are correct, skip remaining steps
NOTE: CRVs must be different for all assigned GR-303 voice terminations on drop
DS0s. Other CRVs will be ignored.
NOTE: In the following command, there must be an equal number of channels and
CRVs.
3. Set DS0 CRV range with the following command:
set ds0 <n:ch> crv <range>
Example: set ds0 2:1-4 crv 118-121
DS1 #1
DS0 #1
Access
Navigator
DS0 #24
DS1 #2
DS0 #1
DS0 #24
DS1 #32
DS0 #1
DS0 #24
•
•
•
•
•
•
CRV #1
CRV #24
CRV #25
CRV #48
CRV #745
CRV #768
To Next Page
Loading...