Carrier Access Access Navigator - Page 290

12-12 August 2003 Access Navigator - Release 1.8
Provision Remote Adit 600 via FDL
Provision Drop DS1s to Remote Adit 600
12. Set drop DS1 loop request code detection off with the following command:
set ds1 <n> loopdetect off
Example: set ds1 1 loopdetect off
13. Set DS1 identification
set ds1 <n> id <"name">
Example: set ds1 10 id "DS1#10"
14. Set DS1 in service
set ds1 <n> up
Example: set ds1 1 up