Carrier Access Access Navigator - Page 548

18-92 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
signal, loops it in theV.35 interface, and sends it back to the V.35 output (see Figure
18-21). To loopdown the interface, use the send remote loopdown command.
Figure 18-21. Remote V.35 Line Loopup
Security: Level 2 (operator)
Syntax: send remote <n> v35 line loopup
Example: send remote 9 v35 line loopup
Message: Loop command sent to remote.
Field Description
n DS1 number, 1 to 32
V.35
DS1
Access
Navigator
CA FDL
Command
Access Bank II
V.35
Line Loopup
T1
Interface
Time Slot
Interchange
Framer