Carrier Access Access Navigator - Page 600

18-144 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
CA DS1# 19 DOWN DROP B8ZS ESF None None
CA DS1# 20 DOWN DROP B8ZS ESF None None
CA DS1# 21 DOWN DROP B8ZS ESF None None
CA DS1# 22 DOWN DROP B8ZS ESF None None
CA DS1# 23 DOWN DROP B8ZS ESF None None
CA DS1# 24 DOWN DROP B8ZS ESF None None
CA DS1# 25 DOWN SWITCH B8ZS ESF 1 None None
CA DS1# 26 DOWN SWITCH B8ZS ESF 3 None None
CA DS1# 27 DOWN SWITCH B8ZS ESF 4 None None
CA DS1# 28 DOWN SWITCH B8ZS ESF 5 None None
CA DS1# 29 DOWN SWITCH B8ZS ESF 2 None None
CA DS1# 30 DOWN SWITCH B8ZS ESF 6 None None
CA DS1# 31 DOWN SWITCH B8ZS ESF 7 None None
CA DS1# 32 UP GROOM B8ZS ESF None None
Description:
Item Description
Circuit ID Circuit identifier set by user for the DS1 number.
Link Link service status: UP, DOWN.
Type DROP, GROOM, SWITCH. Switch type appears only with GR-
303 option.
Linecode AMI, B8ZS.
Framing D4 (SF), ESF, SLC96 (S4).
TermID Line termination identifier, 1 to 28, set by user. (Used in GR-303
communications to specify switch DS1.)
Remote Device MGMT NONE, CAFDL, CAIP <ipaddress>, DS1 <n>.
FDL Type NONE, SLC96 (DDL), T1403 (ANSI T1.403). Switch DS1 FDL
type is always None.