Carrier Access Access Navigator - Page 88

5-6 August 2003 Access Navigator - Release 1.8
Physical Installation
Attach Access Navigator to Equipment Rack
Figure 5-2. Installation in 19-inch Equipment Rack
Figure 5-3. Spacing Requirements
Mount bracket here
for flush mount.
Mounting
Bracket
Mount bracket here for
5 inch forward offset.
Fasten brackets to
Access Navigator
with 6-32 x 3/8"
undercut screws
(four per side).
Fasten brackets to
equipment rack
with appropriate
mounting screws
(two per side).
Mounting
Bracket
B
C
A
4.37 inches
(minimum)
7.00 inches
(minimum)