EasyManua.ls Logo

Carrier Access Access Navigator - Page 92

Carrier Access Access Navigator
704 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-10 August 2003 Access Navigator - Release 1.8
Physical Installation
Attach Access Navigator to Equipment Rack
1. Access Navigator requires at least 4.37 inches (2.5 rack units) of free air space above and below
chassis for air circulation. Insufficient spacing may cause service interruptions, resulting from
equipment overheating and shutting down.
2. Position Access Navigator in equipment rack slot (refer to office records). Ensure that there is at
least 4.37 inches (2.5 rack units) of free air space above and below chassis for cooling (see Figure
5-6 on page 5-10).
3. Secure mounting brackets to equipment rack using appropriate mounting screws (see C in Figure
5-5). Brackets accommodate 1.75 and 2.00 inch hole spacing.
Figure 5-6. Spacing Requirements
4.37 inches
(minimum)
7.00 inches
(minimum)

Table of Contents