4.9 Pull out the handbrake cable from the underside of the vehicle
body.
Notice: Remove the handbrake cable at another side in accordance
with the same method.
4.10 (Handbrake adjustment) The length of the handbrake cable
equipped on this model is designed to be the fixed length. To adjust
the handbrake effects, refer to the part “removal of rear brake”. The
adjustment of the ejector rod length (clockwise for looseness and
counter clockwise for tightness) can achieve the handbrake
adjustment.
4.11 The installation procedure should be conducted with reference
to the removal procedure.
Rotate this place
To Next Page
Loading...
