III. Removal and Installation of In-door harness
Part number: S12-3724050
(I). Preparations
Tools: sleeve wrench, cross head screwdriver, flat head screwdriver
(II). Notes
When disassembling the electrical components and harness, make
sure to disconnect the power supply.
The ignition switch must be OFF.
(III). Removal Steps
1. Removal of license plate light harness.
1.1. Disassemble the rear bumper assembly. (See Removal and
Installation of Rear Bumper)
1.2. Unplug the plug of the license plate light harness.
2. Removal of left-rear group tail Llights harness
2.1. Disassemble the left-rear group tail lights assembly. (See
Removal and Installation of Left-rear Combination Tail Lights)
2.2. Unplug the plug of the left-rear combination tail lights harness.
3. Use a flat head screwdriver to pry off the luggage light, and
unplug the luggage light harness.
To Next Page
Loading...
