2. Installation Steps
2.1. Put the vehicle vehicle carpet inside the vehicle, and take out
the harness connected with the seats, and then press the vehicle
vehicle carpet besideds the middle passage tightly.
2.2. Keep the seat holes visible.
2.3. Spread the vehicle vehicle carpet till it gets to the footrest plate
and press it tightly.
2.4. Spread the left-rear part of the vehicle vehicle carpet according
to the shape of the vehicle floor, keep the installation holes of the
left-rear seats visible, and spread and press the rear part of the
vehicle vehicle carpet according to the shape of the vehicle floor.
V. Removal of Damping Mat
1. Removal Steps
1.1. Remove the vehicle vehicle carpet (See Removal of Vehicle
Vehicle carpet).
1.2. Take down each damping mat.
To Next Page
Loading...
