Chapter II Removal of Trims
I. Removal and Installation of Seat belts
1. Preparations
Tools: flat head screwdriver, wrench, sleeve wrench
Spare parts: disposable clip
2. Notes
Keep the seat belts clean and free of oil, and check them for any
damage.
3. Removal Steps (Take Driver’s Seat belt as an Example)
3.1. Carefully pry up the front sill plate with a flat head screwdriver.
3.2. Remove the front door weather strip by hand.
3.3. Remove the B-pillar plate with a flat head screwdriver.
To Next Page
Loading...
