Chery A113 - II. Removal of Rear Trunk Cover

7.1.2. Use snipe nose pliers to remove the front hood cable off the
pull cover.
7.1.3. Drag out the cable.
7.2. Installation Steps
The installation steps are reverse to those for removal.
II. Removal of Rear Trunk Cover
1. Preparations
Tools: flat head screwdriver, 13# sleeve, wrench and cross head
screwdriver
Material(s): Clip
2. Removal of Rear Decoration Plate
2.1. Pry up the rear decoration plate with a flat head screwdriver
before you take it apart.
2.2. Installation of Rear Decoration Plate
The installation steps are reverse to those for removal.