Chery A113 - Removal and Installation of Reverse Radar Display; Installation Steps; Removal Steps; Removal and Installation of A-Pillar Shield

6． Removal and Installation of Reverse Radar
Display
6.1. Removal Steps
6.1.1. Use a cross head screwdriver to loosen off the screws of the
reverse radar display.
6.1.2. Unplug the harness and remove the reverse radar display.
6.2. Installation Steps
The installation steps are reverse to those for removal.
7. Removal and Installation of A-pillar Shield
7.1. Removal Steps
7.1.1. Use a flat head screwdriver to pry open the weather strip of
the left A-pillar shield, and then take out the left A-pillar shield by
hand.
7.1.2. Take out the left A-pillar shield.