2.6. Open the trunk and take out the trunk vehicle carpet.
2.7. Loosen off the fixing seat of the spare tire and take it out.
2.8. Use a 13# socket wrench to loosen off the fixing bolts in the
rear seat back, and then the rear seat back can be removed.
Torque: 25±3Nm
3. Installation Steps
The installation steps are reverse to those for removal.
III. Removal and Installation of auxiliary
Instrument Panel
Preparation of Tools: cross head screwdriver, flat head screwdriver
1. Removal Steps
1.1. Use a flat head screwdriver to pry open the shield at the hand
brake and gears.
To Next Page
Loading...
