Chery A113 - Removal and Installation of C-Pillar Shield; Installation Steps; Removal Steps

9. Removal and Installation of C-pillar Shield
9.1. Removal Steps
9.1.1. Use a sleeve wrench to loosen off the seat belt bolts (See
Removal and Installation of Rear Seats & Seat belts).
9.1.2. Use a flat head screwdriver to pry open the C-pillar upper
shield.
9.1.3. Remove the C-pillar upper shield.
9.1.4. Please follow the removal steps of left C-pillar upper shield
for that of the right C-pillar upper shield.
9.2. Installation Steps
The installation steps are reverse to those for removal.