Page 19 of 38
Table 2
Trouble Code C1 202(13) C1 205(23)
C1 208(33) C1 211(43)
Possible Case Air gap error:
Air gap too big or self short-circuit
of sensor (resistance value at 0) that
results no signal or the gear ring
not properly installed.
Note: ①The air gap refers to the gap between
the gear ring and the sensor;
② If the malfunctions corresponding to more
than 2 trouble codes can be determined, after
the trouble codes are deleted (erasable trouble
codes), drive the vehicle to above 40km/h to
determine the malfunctions to that the trouble
codes correspond and check in accordance
with the registered trouble codes (determine
the same one trouble code).
Troubleshooting
Flow
still present?
complete
To Next Page
Loading...
