4.3. Use a flat head screwdriver to pry off the plastic cover of the
screws that fix the handle inside the vehicle door.
4.4. Use a cross head screwdriver to loosen off the screws that
secure the handle inside the door, and then disassemble it.
4.5. Use a cross head screwdriver to loosen off the screws that
secure the handle inside the vehicle door, and then disassemble the
handle inside the door.
4.6. Disassemble the shield inside the door by hand.
4.7. Pull off the power window up-down switch connector.
4.8. Use a cross head screwdriver to remove the two fixing screws in
the mount that fixes the rear door handle cover.
To Next Page
Loading...
