3.6. Use a 8# sleeve wrench and a cross head screwdriver to loosen
off the screws and fixing screws below the mud fender and the
bumper.
Installation Torque: 2±0.5 Nm
3.7 Raise the vehicle with a hoister.
3.8. Use a cross head screwdriver and 8#sleeve to loosen off the
fixing bolts and the screws below the mud fenderand the bumper.
Installation Torque: 2±0.5N.m
3.9. Pull off the fog lights connector.
3.10. Remove the bumper.
To Next Page
Loading...
